LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 480 (Engine Mechanical) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Camshaft Bearing Removal >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

J 33049  Camshaft Bearing Remover/Installer

  1. Select the expander assembly and driving washer.
  2. Assemble the J 33049. 
    Fig 1: Identifying Camshaft Bearing Remover/Installer (J 33049)
    G01500685Courtesy of GENERAL MOTORS CORP.
  3. Drive out the camshaft bearings. Use the J 33049. 
    Fig 2: Driving Out Camshaft Bearings
    G01500686Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals