LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Instrument Panel (I/P) Air Outlet Ducts Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the tabs of the air distribution extension duct with the slots in the I/P carrier.
    Fig 1: Installing Air Distribution Extension Duct
    G01498985Courtesy of GENERAL MOTORS CORP.
  2. Rotate the air distribution extension duct to secure the retaining tab to the IP carrier.
  3. Install the I/P assembly. Refer to INSTRUMENT PANEL (I/P) ASSEMBLY REPLACEMENT .
    Fig 2: Rotating Air Distribution Duct To Secure Retaining Tab
    G01498986Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals