Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the I/P assembly. Refer to INSTRUMENT PANEL (I/P) ASSEMBLY REPLACEMENT .
- Disconnect the heads up display module electrical connector.
- Remove the bolts that secure the heads up display module to the I/P.
- Remove the heads up display module.
- Pull the side window defogger ducts from the I/P carrier.
- Pull the side window defogger ducts from the defroster duct.
- Remove the side window defogger ducts from the vehicle.