LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 474 (Exterior Trim) >> Repair Instructions >> Emblem Replacement - Grille >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the emblem to the grille.
    Fig 1: Positioning Emblem To Grille
    G01515593Courtesy of GENERAL MOTORS CORP.
  2. Install the nut to the grille emblem.

    Tighten 

    Tighten the nut to 2 N.m (18 lb in).

  3. Install the grille to the front fascia. Refer to FASCIA GRILLE REPLACEMENT (AZTEK) or FASCIA GRILLE REPLACEMENT (RENDEZVOUS) .
    Fig 2: Installing Nut To Grille Emblem
    G01515594Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals