LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 472 (Steering Wheel & Steering Column) >> Repair Instructions >> Park Pawl Actuator Replacement (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT  .
  2. Remove the tie straps from the park pawl actuator harness.
  3. Remove the park pawl actuator by rotating counterclockwise.
  4. Disconnect the electrical connector.
    Fig 1: Removing Park Pawl Actuator
    G01499431Courtesy of GENERAL MOTORS CORP.