LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 471 (Transfer Case - STEYR) >> Repair Instructions >> Axle Shaft Oil Seal Replacement >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the right front tire and wheel assembly.
  3. Remove the right front wheel drive shaft. Refer to AXLE SHAFT .
  4. Using the J 2619-01  with the J 29794  and the J 23129  remove the axle shaft oil seal (1) from the transfer case.
    Fig 1: Removing Axle Shaft Oil Seal From Transfer Case
    G01499956Courtesy of GENERAL MOTORS CORP.