LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 470 (Antilock Brake System) >> Repair Instructions >> Wheel Speed Sensor Jumper Harness Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel speed sensor connectors (2,3).
  2. Remove the jumper harness grommet from the retainer.
  3. Remove the upper jumper harness connector from the rear body pass-thru connector.
Fig 1: Removing Jumper Harness
G01500352Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals