Valve Lifter Removal

WARNING: This page is about a different car, the 2002 GMC Savana and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 3049-A Valve Lifter Remover

Important: Place the components in a rack so that the components can be reinstalled to their original location.

Remove the bolts and valve lifter pushrod guide.

Fig 1: Valve Lifter Pushrod Guide
Courtesy of GENERAL MOTORS CORP.

Important: Place the valve lifters in the rack in the upright position in order to maintain the oil inside the valve lifters.
Remove the valve lifters.

Fig 2: Valve Lifters
Courtesy of GENERAL MOTORS CORP.

Important: Some valve lifters may be stuck in the valve lifter bores because of gum or varnish deposits and may require the use of J 3049-A for removal.
Use the J 3049-A in order to remove the stuck valve lifters.

Fig 3: J 3049-A
Courtesy of GENERAL MOTORS CORP.