Exhaust Manifold Installation - Left
WARNING: This page is about a different car, the 2002 GMC Savana and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
- Install the NEW exhaust manifold gaskets.
- Install the exhaust manifold.
- Install the spark plug wire shields.
- If reusing the fasteners, apply threadlock GM P/N United States 12345493, GM P/N Canada 10953488, or equivalent, to the threads of the exhaust manifold bolts and stud.NOTE: Refer to FASTENER NOTICE .
- Install the exhaust manifold bolts and stud.
Tighten
- 5.1. Tighten the exhaust manifold bolts and stud on the first pass to 15 N.m (11 lb ft).
- 5.2. Tighten the exhaust manifold bolts and stud on the final pass to 30 N.m (22 lb ft).
- Install the spark plug wires to the spark plug wire retainers.
- Install the spark plug wires onto the spark plugs.