Adhesive Body Side Moldings
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
The body side moldings, emblems and name plates are attached to the body panels with adhesive tape. To insure a good replacement of new or old moldings, emblems, and name plates, the panel surface should be warm 21-32°C (70-90°F), clean, and free of any wax or oily film. Methods are listed to attach loose molding ends, completely removed moldings and replacement moldings, emblems, and name plates.