LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 453 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Front Door Window Belt Outer >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the outside rearview mirror. Refer to Mirror Replacement - Power .
  2. Lower the front door window.
  3. Remove the front door outer belt sealing strip from the door pinch weld flange.
    1. 3.1. Lift upwards, starting at the rear, to disengage sealing strip clips.
    2. 3.2. Slide sealing strip rearward to clear the upper auxiliary molding.
    Fig 1: Removing Front Door Outer Belt Sealing
    G01803632Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals