LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Bumpers) >> Repair Instructions >> Splash Shield Replacement - Rear Bumper Fascia - Right >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear bumper fascia splash shield to the body.
    2. Fig 1: Identifying Rear Bumper Fascia Right Splash Shield
    G01755637Courtesy of GENERAL MOTORS CORP.
  2. Install the rear bumper fascia splash shield to body clips.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the rear bumper fascia splash shield to body nut. Tighten the nut to 2 N.m (18 in lbs).
  4. Install the rear bumper fascia splash shield to body bolts. Tighten the bolts to 2 N.m (18 in lbs).
scientia non olet · About LEMON Manuals