LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Bumpers) >> Repair Instructions >> Fascia Reinforcement Replacement - Rear Bumper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear bumper fascia reinforcement to the rear bumper fascia.
    2. Fig 1: Identifying Rear Bumper Fascia Reinforcement
    G01755639Courtesy of GENERAL MOTORS CORP.
  2. Insert the tabs into the slots.
  3. Bend the tabs over the rear bumper fascia.

    Bend the tabs flat against the bumper fascia. Do not allow the tabs to protrude over the top surface of the bumper fascia.

  4. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper .
scientia non olet · About LEMON Manuals