LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 439 (Door System, Mirror System & Window System) >> Repair Instructions >> Contact Plate Replacement - Sliding Door Jamb >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rivets, that retain the contact plate (1) to the door jamb, using an appropriate drill and drill bit.
  2. Remove the contact plate (1) from the door jamb.
  3. Remove the electrical connector from the contact plate.
Fig 1: Removing Sliding Door Jamb Contact Plate
G01737073Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals