LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 438 (Power Seat System) >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to SIR HANDLING CAUTION in Cautions and Notices.
  1. Disable the SIR System. Refer to DISABLING SYSTEM in SIR.
  2. Move the seat to the full forward position.
  3. Remove the fasteners (1) securing the seat cushion to the seat adjuster assembly.
    4. Fig 1: Locating Seat Cushion Fasteners
    G01803882Courtesy of GENERAL MOTORS CORP.
  4. Lift the front of the seat cushion upwards.
  5. Remove the power seat switch trim bezel. Refer to Seat Switch Replacement - Power  .
  6. Pull the cushion forward in order to disengage the seat cushion from the seat adjuster assembly.
  7. Release the seat cushion cover J channels from the seat cushion frame.
  8. Remove the seat cushion cover (1).
  9. Remove the seat cushion pad (2).
    Fig 2: Identifying Seat Cushion Cover, Pad & Frame
    G01803883Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals