LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Trim Panel Replacement - IP Center >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure the protective tape is still in place.
  2. Align the retaining clips on the IP center trim panel with the openings in the IP.
  3. Gently push inward in order to engage the retainer clips. DO NOT USE FORCE!
  4. Remove the protective tape.
    Fig 1: Installing Center IP Trim Panel
    G01803074Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals