LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the IP cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - IP Cluster  .
  2. Release the four IP cluster pins and pull the cluster rearward to remove from the IP.
    Fig 1: Removing IP Cluster
    G01803120Courtesy of GENERAL MOTORS CORP.