LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Bracket Replacement - Knee Bolster >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left closeout insulator panel. Refer to Closeout/Insulator Panel Replacement - Left  .
  2. Remove the knee bolster. Refer to Knee Bolster Replacement  .
  3. Remove the fasteners securing the primary knee bolster bracket to the instrument panel.
  4. Remove the fasteners securing the primary knee bolster bracket to the steering column support.
  5. Remove the primary knee bolster bracket from the instrument panel.
    Fig 1: Removing Primary Knee Bolster Bracket
    G01803108Courtesy of GENERAL MOTORS CORP.
  6. Remove the secondary knee bolster bracket to carrier fasteners.
  7. Remove the secondary knee bolster brackets from the carrier.
    Fig 2: Removing Secondary Knee Bolster Brackets
    G01803109Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals