Headliner Description

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

The modular headliner consists of a 1-piece composite substrate covered with a foam cloth facing. The construction of the composite substrate does not allow for replacement of the cloth facing and requires that the headlining substrate and cloth be service as a complete assembly. The wiring harness for roof lighting and the sunroof (if equipped) is attached to the back of the headliner and can be serviced separately. The headliner is held in place by 4 locator points and magnets attached to the substrate. Additional support is provided in front by the auxiliary sunshades and interior attachments. If equipped with a sunroof, there will be 2 patches of dual lock material at the front and sides of the sunroof opening and outboard of the overhead console, in addition to magnets.