LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 434 (Body Front End) >> Repair Instructions >> Headlamp and Bumper Fascia Mounting Panel - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fascia. Refer to FASCIA REPLACEMENT -- FRONT BUMPER .
  2. Remove both headlamps. Refer to HEADLAMP REPLACEMENT .
  3. Disconnect the hood release cable from the hood latch. Refer to Hood Latch Release Cable Replacement  .
  4. Remove the headlamp/fascia mounting panel stabilizer bars from the vehicle.
    Fig 1: Removing Headlamp Fascia Mounting Panel Stabilizer Bars
    G01803360Courtesy of GENERAL MOTORS CORP.
  5. Remove the headlamp/fascia mounting panel fasteners from the vehicle.
    Fig 2: Removing Headlamp/Fascia Mounting Panel Fasteners
    G01803361Courtesy of GENERAL MOTORS CORP.
  6. Remove the headlamp/fascia mounting panel from the vehicle.
    Fig 3: Removing Headlamp/Fascia Mounting Panel
    G01803362Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals