Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
- Position the engine ground cable to the engine.CAUTION: Refer to FASTENER NOTICE .
- Install the bolt securing the engine ground cable to the generator.
Tighten
Tighten the generator mounting bolt to 50 N.m (37 lb ft).
- Install the bolt (1) securing the engine ground cable (2) to the right side body frame rail.
Tighten
Tighten the engine ground cable bolt to 50 N.m (37 lb ft).