LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 425 (Engine Mechanical - 4.0L (Unit Repair)) >> Repair Instructions >> Engine Flywheel Removal >> Tools Required

Tools Required

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

J 44214  Flywheel Holder

  1. Rotate the engine so that the main bearing bolts are facing up.
  2. Hold the flywheel in order to prevent rotation.
  3. Loosen the 8 flywheel mounting bolts.
  4. Remove 7 of the eight flywheel mounting bolts leaving one bolt at the top of the crankshaft rotation.
  5. Grip the flywheel and remove the remaining bolt.

    Do not drop the flywheel when removing the final bolt.

    Fig 1: Removing Flywheel
    G01815707Courtesy of GENERAL MOTORS CORP.
  6. Remove the J 44214  from the engine block.
    Fig 2: Removing J 44214
    G01815708Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals