LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 425 (Engine Mechanical - 4.0L (Unit Repair)) >> Repair Instructions >> Engine Flywheel Cleaning and Inspection >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the engine flywheel for the following conditions:
    • Stress cracks around the engine flywheel-to-torque converter mounting bolt hole locations (1) and/or engine flywheel-to-crankshaft (2, 4)

    Important:  Do not attempt to repair the welded areas that retain the ring gear to the engine flywheel plate. Install a new engine flywheel.

    • Cracks at welded areas that retain the ring gear onto the engine flywheel (3)
    • Damaged or missing ring gear teeth (5)
  2. Replace the engine flywheel as necessary.
scientia non olet · About LEMON Manuals