LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 425 (Engine Mechanical - 4.0L (Unit Repair)) >> Repair Instructions >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive belt tensioner. Be sure to locate the tensioner anchor pin in the cylinder head recess.
    CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the drive belt tensioner bolt.

    Tighten 

    Tighten the drive belt tensioner bolt to 50 N.m (37 ft lbs).

    Fig 1: Installing Drive Belt Tensioner
    G01817410Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals