LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (Engine Mechanical - 3.5L (Unit Repair)) >> Repair Instructions >> Piston, Connecting Rod, and Bearings Cleaning and Inspection >> Connecting Rod Cleaning

Connecting Rod Cleaning

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the connecting rods in solvent.
    WARNING: Wear safety glasses in order to avoid eye damage.
  2. Dry the connecting rod using compressed air.
  3. Remove the connecting rod cap and clean the threads. If you have not done so already, discard the connecting rod bolts (3). The bolts are not reusable.
  4. Remove the connecting rod bearing and discard. Never reuse a connecting rod bearing used in a running engine.
scientia non olet · About LEMON Manuals