LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 405 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion and rear seat back. Refer to SEAT BACK REPLACEMENT - REAR (NON-FOLDING) or SEAT BACK REPLACEMENT - REAR (FOLDING) .
  2. Remove the rear quarter upper trim panel. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER UPPER .
  3. Remove the rear quarter lower trim panel. Refer to TRIM PANEL REPLACEMENT - REAR QUARTER LOWER .
  4. Remove the rear seat belt retractor anchor bolt.
    Fig 1: Identifying Rear Seat Belt Retractor Anchor Bolt
    G01756519Courtesy of GENERAL MOTORS CORP.
  5. Loosen the rear window trim panel. Refer to TRIM PANEL REPLACEMENT - REAR WINDOW SHELF .
  6. Remove the rear sound barrier. Refer to SOUND BARRIER REPLACEMENT - REAR SEAT BACK .
  7. Remove the rear seat belt retractor bolt.
    8. Fig 2: Identifying Rear Seat Belt Retractor Bolt
    G01756520Courtesy of GENERAL MOTORS CORP.
  8. Remove the rear seat belt retractor from the vehicle.
scientia non olet · About LEMON Manuals