LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 405 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Center Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat. Refer to SEAT REPLACEMENT - SPLIT BENCH .

    Important:  When drilling out the rivet do not enlarge the rivet hole.

  2. Drill out the rivet that retain the seat belt buckle to the rear of the front seat track using a 1/4 inch (6.35 mm) drill bit.
    Fig 1: Identifying Center Front Seat Belt Buckle
    G01756493Courtesy of GENERAL MOTORS CORP.
  3. Remove the seat belt buckle from the front seat track.
scientia non olet · About LEMON Manuals