LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 400 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Front Wheel Opening >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wheel opening molding to the fender extension.
  2. Install the push pin rivets that retain the wheel opening molding to the fender extension.
    Fig 1: Installing Wheel Opening Molding & Push Pin Rivets
    G01736725Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals