LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 399 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Body Side Lower Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the body side rear lower garnish molding to the vehicle.
  2. Press on the body side rear lower garnish molding in order to engage the retaining clips.
  3. Install the body side trim panel. Refer to Trim Panel Replacement - Body Side Rear .
    Fig 1: Installing Body Side Trim Panel
    G01737368Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals