LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Multifunction Alarm Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel driver knee bolster panel. Refer to Trim Panel Replacement - Knee Bolster .
  2. Disconnect the multi-function audio alarm module (2) from the retainer on the left inside knee bolster bracket (4).
  3. Disconnect the electrical connector (3) from the multi-function audio alarm module (2).
  4. Remove the multi-function audio alarm module (2) from the vehicle.
    Fig 1: Disconnecting & Removing Multi-Function Audio Alarm Module
    G01736558Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals