LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Knee Bolster Replacement - Left >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel driver knee bolster panel. Refer to Trim Panel Replacement - Knee Bolster .
  2. Remove the screws that retain the relay center bracket to the instrument panel driver knee bolster inner and outer brackets.
  3. Remove the relay center bracket from the instrument panel driver knee bolster inner and outer brackets.
  4. Remove the nuts that retain the instrument panel driver knee bolster deflector assembly and the driver knee bolster inner and outer brackets to the instrument panel carrier.
  5. Remove the instrument panel driver knee bolster deflector assembly and the driver knee bolster inner and outer brackets from the vehicle.
    Fig 1: Removing Left Knee Bolster
    G01736568Courtesy of GENERAL MOTORS CORP.