LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 393 (Engine Cooling System) >> Repair Instructions >> Throttle Body Heater Hose Replacement - Inlet >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the throttle body air inlet duct.
  2. Drain the cooling system. Refer to Draining and Filling Cooling System 
  3. Remove the throttle body inlet hose clamp and hose (3) from the coolant pipe.
  4. Remove the throttle body inlet hose clamp and hose from the throttle body.
  5. Remove the throttle body inlet hose (3).
    Fig 1: Throttle Body Inlet Hose
    G01764776Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals