Balance Shaft Removal

WARNING: This page is about a different car, the 2002 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required: J 6125-1B Slide Hammer

Remove the balance shaft driven gear bolt.
Remove the balance shaft driven gear.

Fig 1: Balance Shaft Driven Gear
Courtesy of GENERAL MOTORS CORP.
Remove the balance shaft retainer bolts.
Remove the balance shaft retainer.

Fig 2: Balance Shaft Retainer
Courtesy of GENERAL MOTORS CORP.
Use J 6125-1B to remove the balance shaft.

Fig 3: Use J 6125-1B To Remove The Balance Shaft
Courtesy of GENERAL MOTORS CORP.