Oil Level Indicator and Tube Installation

WARNING: This page is about a different car, the 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Install the oil level indicator and oil level indicator tube.
Install the oil level indicator tube bolt.
Tighten:

Tighten the oil level indicator tube bolt to 25 N.m (18 lb ft)

Fig 1: Oil Level Indicator And Oil Level Indicator Tube
Courtesy of GENERAL MOTORS CORP.
Install the thermostat bypass pipe.
Install the thermostat bypass pipe hose.

Fig 2: Thermostat Bypass Pipe Hose
Courtesy of GENERAL MOTORS CORP.
Install the thermostat bypass pipe hose clamps (5).
Install the thermostat bypass pipe to engine front cover bolt (4).
Tighten:

Tighten the thermostat bypass pipe to engine front cover bolt to 11 N.m (98 lb in)

Fig 3: Thermostat Bypass Pipe And Components
Courtesy of GENERAL MOTORS CORP.
Install the thermostat bypass pipe to throttle body hose clamps.
Install the thermostat bypass pipe to throttle body nut.
Tighten:

Tighten the thermostat bypass pipe to throttle body nut to 25 N.m (18 lb ft)

Fig 4: Thermostat Bypass Pipe To Throttle Body Nut
Courtesy of GENERAL MOTORS CORP.