LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Rear Right Park Brake Cable >> Removal

Rear Right Park Brake Cable: Removal

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the park brake. Raise and support the vehicle. Loosen the park brake cable equalizer nut in order to remove the park brake left side cable from the park brake equalizer.
  2. Remove the park brake cable from the park brake actuator. See Fig 1 . Drill out the 2 rivets retaining the park brake cable to the rear crossmember. See Fig 2 .
Fig 1: Removing/Installing Park Brake Cable From Park Brake Actuator
G00307636Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing Park Brake Cable-To-Bracket
G00307637Courtesy of GENERAL MOTORS CORP.