LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Warning Lamp Switch >> Installation

Park Brake Warning Lamp Switch: Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Install the park brake indicator switch. Install the park brake indicator switch screw. Tighten the screw to specifications. See TORQUE SPECIFICATIONS  . Install the park brake indicator switch electrical connector. Install the left-side carpet retainer. Install the left-side instrument panel insulator.

  1. Snap the I/P courtesy lamp into the I/P insulator.
  2. Position the I/P insulator to the instrument panel.
  3. Install the push-in retainers to the I/P insulator to instrument panel.
  4. Install the press-on retainers to the I/P insulator to dash mat.

scientia non olet · About LEMON Manuals