LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Park Brake Cable Equalizer >> Installation

Park Brake Cable Equalizer: Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure that the park brake actuator lever is correctly oriented in the park brake actuator. See Fig 1 . Install the park brake actuator. Install the rear wheel hub and bearing. Adjust the park brake shoe and lining. Install the park brake cable bracket.
  2. Install the park brake cable to the park brake actuator lever. See Figure . Install the rear brake rotor. Install the rear brake caliper bracket with the brake caliper. Install the tire and wheel. Tighten to specification. See TORQUE SPECIFICATIONS  .
  3. Tighten the park brake cable equalizer nut until both park brake cable ends contact their respective park brake actuator levers. Adjust the park brake cable. Lower the vehicle.
Fig 1: Removing & Installing Park Brake Cable Equalizer
G00076375Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals