LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Front Brake Rotor >> Installation

Front Brake Rotor: Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any corrosion from the brake rotor flange. Use the Hub Cleaning Kit (J-42450-A) in order to clean the hub flange. Install the brake rotor.
  2. Install the brake caliper bracket with the brake caliper. Install the tire and wheel. Tighten to specification. See TORQUE SPECIFICATIONS  . Lower the vehicle.
scientia non olet · About LEMON Manuals