LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Drum Brake Hardware >> Removal

Drum Brake Hardware: Removal

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Remove the rear wheel and tire. Remove the brake drum. See BRAKE DRUM  .
  2. Disengage the adjuster spring hook end from the tab on the adjuster actuator. See Figure . Remove the straight end of the adjuster spring from the brake shoe. Use Brake Shoe Spanner and Spring Remover (J-38400) to remove the universal spring from the brake shoes. Remove the star adjuster.
  3. Remove the park brake actuator lever and wave washer from the brake shoe. Clean all of the drum brake system components with denatured alcohol or equivalent. Inspect all of the drum brake system components.
scientia non olet · About LEMON Manuals