LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Brake Backing Plate >> Installation

Brake Backing Plate: Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the backing plate. Install the wheel bearing/hub. See appropriate REAR SUSPENSION article in SUSPENSION. Install the wheel cylinder. See WHEEL CYLINDER  . Install the park brake cable to the backing plate. See REAR PARK BRAKE CABLE  . Install the park brake actuator to the park brake cable. Install the brake shoes. See BRAKE SHOES  .
  2. Install the brake drum. See BRAKE DRUM  . Install the Tire and Wheel. Lower Vehicle.
scientia non olet · About LEMON Manuals