Stoplight Switch Adjustment
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Insert the stoplight switch and the cruise control switch if equipped into the brake pedal bracket. Install the stoplight switch and the cruise control switch if equipped into the slotted grooves until the switches are fully depressed against the brake pedal, then turn the switches clockwise approximately 1/4 turn, the switches should now be installed and adjusted. See Fig 1 . Inspect the stoplights and the cruise control for proper operation.