LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 378 (Engine Cooling System) >> Removal And Installation >> Heater Inlet Hose - L61 >> Installation

Heater Inlet Hose - L61: Installation

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install heater inlet hose and clamp to engine port. Position clamp at 10 o'clock.
    Fig 1: Installing Heater Inlet Hose And Clamp
    G01041289Courtesy of GENERAL MOTORS CORP.
  2. Install heater inlet hose and clamp to heater core inlet pipe. Position clamp at 9 o'clock.
  3. Fill cooling system.
    Fig 2: Installing Heater Inlet Hose And Clamp To Heater Core Inlet Pipe
    G01041290Courtesy of GENERAL MOTORS CORP.