LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 378 (Engine Cooling System) >> Removal And Installation >> Auxiliary Coolant Pump Hose >> Installation

Auxiliary Coolant Pump Hose: Installation

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install auxiliary coolant pump hose and clamp to pump outlet.
  2. Position clamp at 10 o'clock.
  3. Lower vehicle.
  4. Install auxiliary coolant pump hose and clamp to engine port.
  5. Position clamp at 2 o'clock.
  6. Install battery box /UHJB assembly.
  7. Connect negative battery cable.

    Torque: 

    Battery Terminal Bolt: 17 N.m (13 ft-lbs) 

  8. Fill cooling system.
    Fig 1: Installing Auxiliary Coolant Pump Hose And Clamp To Engine Port
    G01041312Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals