Stabilizer Shaft Insulator Replacement: Installation
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Install the stabilizer shaft insulators to the stabilizer shaft.
- Install the stabilizer shaft insulator brackets.NOTE: Refer to FASTENER NOTICE .
- Install the stabilizer shaft insulator bracket bolts and nuts. Tighten the stabilizer shaft insulator bracket nuts to 85 N.m (63 lb in).
- Lower the vehicle.