Shock Absorber Replacement: AWD: Installation
WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shock absorber.NOTE: Refer to FASTENER NOTICE .
- Install the shock absorber upper bolt and the shock absorber nuts. Tighten the shock absorber nuts to 85 N.m (63 lb ft).
- If the vehicle is equipped with automatic level control, install the air tube connector to the shock absorber.
- Remove the utility stand.
- Lower the vehicle.