LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 371 (Rear Suspension System) >> Repair Instructions >> Rear Axle Lower Control Arm Bushing Replacement Rear Bushing - All Wheel Drive >> Installation

Rear Axle Lower Control Arm Bushing Replacement Rear Bushing - All Wheel Drive: Installation

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make a mark on the bushing at the same installation depth and orientation as the old bushing.
  2. Use a press in order to install the bushing to the control arm.
  3. Install the lower control arm and mounting bolts (1, 5). Refer to Figure.
  4. Install the coil spring (2). Refer to Figure.
  5. Install the coil spring (2). Refer to Coil Spring Replacement. Install the wheel and tire assemblies.
  6. Inspect the rear camber and toe angles and adjust as necessary. Refer to SPECIFICATIONS .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals