LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Servicing - A/T (VT25-E)) >> Removal & Installation >> Transaxle Range Switch >> Removal

Transaxle Range Switch: Removal

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: DO NOT tip battery over 45° angle or acid could spill.
NOTE: Record all pre-set radio stations prior to disconnecting battery and reprogram pre-set stations after repair.
  1. Remove battery cover. Disconnect negative battery cable. Disconnect positive battery cable. Loosen battery hold-down screw and remove battery. See Figure .
  2. Remove battery cooling box. See BATTERY COOLING BOX  . Remove battery tray bracket. Loosen battery tray bracket screws and remove bracket. See Figure .
  3. Apply parking brake and place control shift lever in Neutral position. Using Fascia Retainer Remover (J36346) remove control cable assembly from transaxle range switch lever.
  4. Disconnect harness connectors from transaxle range switch. Remove transaxle range switch lever nut and lever. Remove transaxle range switch bolts and remove transaxle switch.