LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Servicing - A/T (VT25-E)) >> Removal & Installation >> Input & Output Speed Sensors >> Removal

Input & Output Speed Sensors: Removal

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove control valve body cover assembly. See CONTROL VALVE BODY COVER  .
  2. Remove control valve body assembly. See CONTROL VALVE BODY  .
  3. Remove bolts and input and output speed sensor assembly from transaxle case assembly. See Fig 1 .
Fig 1: Removing & Installing Input & Output Speed Sensors
G00078064Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals