LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Wheel Cylinder >> Removal

Wheel Cylinder: Removal

WARNING: This page is about a different car, the 2003 Buick Regal, 2003 Buick Century, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the brake drum. See BRAKE DRUM  .
  4. Remove the brake shoes. See BRAKE SHOE  .
  5. Clean the dirt and foreign material around the wheel cylinder.
  6. Remove the bleeder valve.
  7. Disconnect the brake pipe fitting from the wheel cylinder. Plug the open brake pipe ends.
  8. Remove the wheel cylinder mounting bolts.
  9. Remove the wheel cylinder.
scientia non olet · About LEMON Manuals