LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Disc Hardware (Rear) >> Installation

Disc Hardware (Rear): Installation

WARNING: This page is about a different car, the 2003 Buick Regal, 2003 Buick Century, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all parts in clean, denatured alcohol.
  2. Dry with low pressure, non-lubricated, filtered air.
  3. Inspect the brake caliper bracket for cracks. If cracked, replace bracket.
  4. Lubricate the brake caliper pin bolt sleeves with high temperature silicone lubricant.
  5. Install the brake caliper bracket. See CALIPER BRACKET (REAR)  .
  6. Install the brake pad retainers to the bracket caliper bracket.
  7. Install the brake pads to the bracket caliper bracket.
  8. Install the brake caliper to the brake caliper bracket. See CALIPER BRACKET (REAR)  .